Required Specifications for Beamo App

Note: The Beamo App runs on an iPhone smartphone. To get the best performance of the app, we recommend using the following devices and iOS below:

 

Least Required Operating System & Hardware

  • iOS 14.3 or later

  • iPhone 8 or later

  • Ricoh Theta Z1, V, SC2 with the latest firmware

Caution: Ricoh Theta SC2 will not support the 360 camera setting feature since they do not support plug-ins. And this can result in the limited future capability of Beamo.

 

  • iOS 14.3 or later

  • iPhone 11 or later  

  • Ricoh Theta Z1, with the latest firmware

Note: For your business use, we strongly recommend using the Ricoh Theta Z1 for creating a better digital twin and future development capability. 

 

Check the iOS version and model of the iPhone by going to:

Settings>General>About

 

*Tested environments

iOS version Beamo App version Ricoh Theta
 iOS 15.4.1 (iPhone 12 Pro)
 iOS 15.3.1 (iPhone 11 Pro)
 iOS 14.8.1 (iPhone SE2)
 2.1.5

 Ricoh Theta V
 firmware version 3.70.1

 iOS 15.1 (iPhone 12 Pro)
 iOS 15.3.1(iPhone 11 Pro)
 iOS 14.8.1 (iPhone SE2)

 2.1.3

 Ricoh Theta V
 firmware version 3.70.1

 iOS ver.14.8.1 (iPhone SE2)
 iOS ver.15.2 (iPhone 11 Pro)
 iOS 15.2 (iPhone 12 Pro)

 2.1.0

 Ricoh Theta V
 firmware ver. 3.70.1

 iOS ver. 14.8 (iPhone SE2)  2.0.7

 Ricoh Theta V
 firmware ver. 3.70.1

 iOS ver. 14.7.1 (iPhone SE2/XR)
 iOS ver. 15 (iPhone 11 pro) 
 2.0.6   
 
 
 Looking for information or Beamo Portal?  Check here.
Was this article helpful?
0 out of 0 found this helpful